In-house CNC
Optic Cuts & Slide Milling
Direct-mount cuts for the optic you actually run. We cut for your exact optic whenever possible, so it sits tight and lower to the bore.
Footprints we cut
Built around your optic
- Trijicon RMR, RMR HD and RMRcc
- Shield RMSc and Holosun 407K / 507K / EPS Carry pattern
- Leupold DeltaPoint Pro
- Aimpoint ACRO and other enclosed emitters
Not sure what fits? Send us your pistol model and optic and we'll confirm before anything gets cut.
Find your fit
Compatible Footprints
Every optic bolts down through a "footprint," the pattern of screws and recoil lugs on the bottom of the sight. We cut for your exact optic whenever possible, so it sits low and locks in tight. Pick your slide size below to see the optics we cut for most often.
What size is your slide?
Glock 17/19/45/34, S&W M&P 2.0, Walther PDP, CZ P-10 and P-07, Springfield Echelon, Ruger RXM, 1911s and similar duty-width slides
These slides have the room for a full-size optic, the most common choice for duty, home defense and competition.
- RMR footprint: Trijicon RMR Type 2, Trijicon RMR HD, Trijicon SRO, Trijicon RCR, Holosun 507C / 407C, Holosun 508T, Holosun 507 Comp
- ACRO footprint (enclosed): Aimpoint ACRO P-2, Aimpoint ACRO C-2, Steiner MPS
- DeltaPoint Pro footprint: Leupold DeltaPoint Pro, Vortex Defender-ST, Vortex Defender-XL, EOTech EFLX
- Holosun 509T footprint (enclosed): Holosun 509T
- Docter / Noblex footprint: Vortex Venom, Vortex Viper, Burris FastFire 3
- C-More footprint: C-More RTS2 / STS2, Primary Arms GLx RS-15
Do you have your optic, or are we supplying it?
We cut to the actual optic whenever possible, so bring or ship it with your slide if you have it. Questions? Message us in the On Point app.
More than a pocket
Milling options
Slide milling is $150/hr. Optics, sights and parts are extra. Custom milling currently runs 6+ weeks. No deposit. Optic cuts are paid at completion.
Optic cut
Direct-mount pocket cut to your optic's footprint, with screw holes and recoil bosses where the design calls for them.
Window & lightening cuts
Weight reduction and a custom look, cut on our CNC.
Serrations & porting
Front serrations for manipulation, and porting where it fits the build.
Finish to match
Add Cerakote, DLC or PVD so the slide comes back looking factory or fully custom.
Ready to run a dot?
Tell us your pistol and optic. We'll confirm the footprint, quote it, and book your drop-off.